Concrete Coating Removal, Grinding and Polishing Machine

5HP, Variable Speed Drive, Heavy Duty Gear Driven,Power:220V Single Phase 15 amps,RPM 1575, Motor Type:Siemens, 350 lb, Universal Plate, Dimensions:41W x 20L x 42H , Path 25 x 25 sweep

The DiamaGrind floor preparation machine is the ideal machine for grinding and polishing concrete floors in residential applications. This versatile machine will grind, hone, and polish all stone and concrete floors in the tightest of spaces. The concrete grinder weighs 400 LBS dry and comes with an additional 50 lb weight. When used wet, the 8 gallon water reservoir will supply ample water to the working surface and when full will add 67 lbs of additional weight. Wet or dry the DiamaGrind Floor Preparation Machine will get the job done. The X1 is extremely stable and easy to control, no need to wrestle with the machine when grinding or removing coatings. The gear driven floating heads allow the diamond tooling to conform to high and low spots in floor surfaces. Solid steel gear construction will provide years of worry free operation. The 180 degree fully adjustable handle allows you to maneuver around small areas and folds down for transport and storage. The X1 is powered by a 220 volt 5 hp industrial motor which is controlled by an online phase converter and VFD (Variable Frequency Drive) allowing for 220 volt, single phase use and variable speed settings from 0 - 1500 rpm. The water delivery system is controlled by an adjustable thumb operated toggle for ease of use on the go. High impact plastic shrouds protect the motor from damage. Fully adjustable leveling system allows diamond tooling of different heights or thicknesses to be adjusted for proper uniform floor contact.The anti marking wheels protect your floor from wheel marks. It has an 8 gallon molded high impact plastic water tank with integrated debris screen. 2 removable solid steel handles screw into place for easy lifting and securing into your trailer with cargo straps. Triangular diamond plate design achieves cross diamond grinding for a clean and uniform scratch pattern. Additional triangular Velcro pad drivers are included to allow the use of ANY Velcro backed diamond tool in 3" 4" and 5" sizes.

Estimated Rates- Mastic Removal rates:200 sq.ft/hr - Thin Set Removal Rates:200 sq.ft./hr - Mil Coating Removal Rates:50 sq.ft. /hr - Concrete Polishing Rates: 300 sq.ft./hr

Grind up to 1/8 inch off of the edge! - COMES WITH:

2 universal magnetic plates-holds 6 diamond tools, Power cord, Skirt for dust collection, 25 lb weight, water tank

 All for Only $6695.00- includes shipping anywhere in continental U.S.

Great for start-up companies. You can tackle your first job with this package. Make Money with this Machine!Great add-on for any polisher. Gets into small spaces like bathrooms, elevators, electrical rooms and more! Grinds up to 1/8 inch of the edge!!! Manufacturer Limited Warranty-1 year-parts free from defects only.

• 6/pcd coating removal Trapezoid diamonds-
• 6-30/40 two bar trapezoid grinding plates-
• 6-60/80
• 6-100/120
• Polishing pads-
• 6-50 grit
• 6-100 grit
• 6-200 grit
• 6-400 grit
• 6-800 grit
• 6-1500 grit
• 6-3000 grit ---
• 1-5 gal densifier-
• 1- 1 gal guard-
• 6- 3 inch burnishing pads-
• 6 Aluminum adaptor plates for pads

We also carry :